What to do if mobile phone cannot find Funkwerk Automobile Accessories EGO FLASH?
If your mobile phone can't find the Funkwerk Automobile Accessories EGO FLASH during coupling, it might be because the EGO FLASH is already coupled with another device. Cancel the existing connection and try again.
Why is my iPodTM not connecting to Funkwerk EGO FLASH?
If your iPodTM cannot connect to the Funkwerk Automobile Accessories EGO system, it could be due to an incorrect connection of the components, the EGO iDapter not being completely initialized, or the EGO iDapter cable not being completely connected. Disconnect the system from the mains power supply and check the connections, fixing any faults. If that doesn't work, shut down and restart the system. Finally, try reconnecting the cable to the iPodTM.
Why can't people hear me on my Funkwerk EGO FLASH Automobile Accessories?
If the person you are speaking with cannot hear you when using Funkwerk Automobile Accessories, the microphone may not be plugged in. Connect the microphone to the electronics box. If the cable is defective, it should be replaced.
Why does my Funkwerk Automobile Accessories sound fuzzy?
If the sound from your Funkwerk Automobile Accessories is fuzzy or scratchy, it's likely due to a poor Bluetooth® connection. Try reducing the distance between your mobile phone and the EGO FLASH, or removing any metallic obstructions.
What to do if Funkwerk EGO FLASH Automobile Accessories system stops responding?
If the Funkwerk Automobile Accessories system no longer reacts, simultaneously press the green button and the „up“ button for longer than 2 seconds. After a short wait time, the EGO FLASH initializes itself again.
General| Brand | Funkwerk |
|---|---|
| Model | EGO FLASH |
| Category | Automobile Accessories |
| Language | English |
Determines the necessary vehicle and mobile phone setup for the EGO FLASH.
Guidance on selecting suitable physical locations for device components within the vehicle.
Detailed steps for physically mounting the EGO FLASH electronics box, microphone, and control unit.
Instructions for wiring the EGO FLASH to the car audio system and connecting components.
An overview of the capabilities and functions offered by the EGO FLASH system.
Explanation of device symbols, status bar icons, and key operations.
Details on using the text input system for names and numbers.
Initial setup, Bluetooth pairing, and basic operation of the EGO FLASH.
Answers to common questions about the EGO FLASH features and usage.
Contact information for customer support and service inquiries.
Details on optional accessories like the Stereo Mute Box and charging cradle.
List of individual replacement components for the EGO FLASH.
Specifications and technical details of the EGO FLASH.
Certification marks, FCC statements, and conformity information.
To Next Page
