Trackside Worker GSM-R User Guide
10
th
March 2015 Page 14
6 Setting up and Terminating Calls
To make a call on the phone dial the required number and press the send button.
The "Establishing call" message and the corresponding pictogram of
the call destination
appear in the display filed.
The call can be ended at any time by pressing the exit button.
6.1 Outgoing Calls
Call on number dialled
1.
Enter the number to using the keyboard to the
initial state.
2.
Push the send button .
The connection is established. The display shows the call
number and the dialing symbol.
3.
Listen and speak like a conventional mobile phone.
Call from the phonebook
1.
Open the menu
Phonebook
Phonebook entry [x]
.
2.
Push the send button .
Or 2. Press the left-hand selection button Select.
3.
Select the entry Call.
4.
Confirm with the left-hand selection button Select.
The display shows the call number and the dialing symbol.
NOTE:
Call to Rail Net extensions use 901 XXX XXXXX
Calls to fixed terminals use functional numbers 7XXX XXXX
To Next Page
Loading...
Need help?
General
