Funkwerk GSM-R User Manual

Page 17 Version 0.12
6.6 Calling the Operational Terminals
There are two ways to call the operational terminals
1. Dialling the short code
When using the Short code the GSM-R Network will decide which terminal
to route the call to
2. Dial the terminal phone number
6.6.1 Calling the Signaller
Dialling the Short code:
1. Enter the 1200 using the keyboard.
2. Push the send button .
The display shows the called number and the dialling symbol.
3. Listen and speak like a conventional mobile phone.
4. Push the exit button , to terminate the outgoing call.
Dialling the signaller terminal number:
1. Look up the number from the phone book provided by Network
Rail Telecom
2. Enter the phone number using the keyboard.
3. Push the send button .
The display shows the called number and the dialling symbol.
The connection is established.
4. Listen and speak like a conventional mobile phone.
5. Push the exit button , to terminate the outgoing call.
6.6.2 Calling the Route Controller
Dialling the Short code:
1. Enter the 1300 using the keyboard.
2. Push the send button .
The display shows the call number and the dialling symbol.
3. Listen and speak like a conventional mobile phone.
4. Push the exit button , to terminate the outgoing call.
The display shows the call number and the derogation symbol.
Dialling the Route Controllers terminal number:
1. Look up the number from the phone book provided by Network
Rail Telecom
2. Enter the functional number using the keyboard.
3. Push the send button .
The display shows the call number and the dialling symbol.
4. Listen and speak like a conventional mobile phone.
5. Push the exit button , to terminate the outgoing call.

Funkwerk GSM-R Specifications

General

Brand	Funkwerk
Model	GSM-R
Category	Handsets
Language	English