Page 15 Version 0.12
6.2 Hold
During existing calls it is possible to place the existing call on hold and to setup another
call.
You can toggle between the two calls.
Initiate state
You are already on a call.
1.
Press the left-hand selection button Options.
2.
Select the entry Add call.
The first call is put on hold.
3.
Call a number or select a number from your phone book.
The second call is now live.
Symbol explanation
Icon Description
Call is on hold
Call is active
Table 21 Symbol of Call
Swap
1.
Press left-hand selection button Options.
2.
Select the entry Swap, to alternately speak to the two phones.
You can toggle between the two calls as often as you like. The
appropriate pictogram of
the active connection appears.
End call
1.
During the call Press the left-hand selection button Options.
2.
Select the entry End call, to terminate the call with a phone.
End all calls
1.
To terminate all calls, push the exit button , or the left
selection button
Options
End all calls
6.3 Receiving a Call during Existing Call
Initiate state
Whilst on a call if another call is incoming.
The following status message “Call is
waiting“ appears.
Take
You can take second call, this places the first is placed on hold.
Abort
You can reject the second incoming call.
Replace
You can replace the active call with the incoming call. The initial call
will be terminated.
► Select an entry.
To Next Page
Loading...
Need help?
General
