3. ADJUSTMENTS
3-7
[FORMAT]
Select the format for LAN connection, [IEC Ed.4] or [IEC Ed.5] (default: [IEC Ed.5]).
[TRANSMISSION GROUP SETUP]
Open the [TRANSMISSION GROUP SETUP] window to set the IP address or port.
[IP ADDRESS]: Set the IP address, [000.000.000.000] to [255.255.255.255] (default:
[239.192.000.004]).
[PORT]: Set the port, [00000] to [65535] (default: [60004]).
Note: To comply with the IEC standards, the following conditions are required.
• [IP ADDRESS]: Set between [239.192.000.001] and [239.192.000.064].
• [PORT]: Set between [60001] and [60064]
3.3 [SIMULATION] sub menu
The simulation mode displays and outputs internally specified speed data. This mode
can be used for simulation and to check output to external equipment. "SIM" appears
on the screen when the simulation mode is active.
On the main menu, select [EQUIPMENT] →[SIMULATION] to open the [SIMULA-
TION] sub menu.
SIM
[EQUIPMENT] sub menu Option menus
To Next Page
Loading...
