3. ADJUSTMENTS
3-19
3.5.5 SPEED TRIAL
Show the average ship’s speed for the
specified period. Set the trial time then
press the X key to start the trial. To stop
the trial test, press the W key. If a USB
flash memory is connected to the dis-
tributor unit, the distributor unit outputs
the trial result.
Note: To output the results to a USB
flash memory, connect a USB to the
USB port in the distributor unit (shown the in figure above-right).
Item Meaning
[RD-502 VERSION] Version of RD-502
DAY/NT key By pressing DAY/NT key of RD-502, changed figure color red
→ blue → red ….
key By pressing
key of RD-502, changed figure color red → blue
→ red ….
key By pressing S key of RD-502, changed figure color red → blue
→ red ….
MENU/ESC key Go back to [TEST] sub menu.
Item Meaning Range
[TRIAL TIME] Trial time (min) [10] to [60]
[EXPORT] Set [ON] to export the measurement result to
an USB device.
[ON] or [OFF]
[TIME] Elapsed time from trial start [00 min 00.0 sec] to
[60 min 00.0 sec]
01 . 01
DST board 65P6110
LIF board
65P6111
(option)
USB portUSB port
: Measuring speed
To Next Page
Loading...
