Furuno FA-50 - Appendix; Menu Tree

AP-1
APPENDIX
Menu Tree
Initial Setup COM Port Setup Data Type
(
IEC61162 , IEC61162+P-sentence, Off)
Tx Speed (
38400 bps )
RX Speed
(
Auto , Manual ( 4800 bps , 38400 bps))
Network Setup MAC Address
IP Address (
172.031.024.003 )
Subnet Mask (
255.255.000.000 )
Gateway Address (
000.000.000.000 )
NavNet Port Number (
10000 )
Host Name (AIS0-AIS9,
AIS0 )
AIS Data Output (
Continuous , Auto)
Ship Static Edit (Required a password.)
User Clear (Yes, No)
Own Vessel Data Own Static
(MMSI, Ship Name, Call Sign, Internal Antenna Position,
External Antenna Position, Ship Type,
Cargo Type (0-7,
7 Pleasure craft ))
View Channel
(RX1, RX2, Power, Region List, Group Assignment)
Message Send Message (shows pre-defined 10 messages,
1 )
Tx Log
Rx Log
Alarm Status
Sensor Status Transponder Test
(Version, CPU1RAM, CPU2RAM, ROM, RX1, RX2)
GPS Test (Version, ROM, RAM, Antenna)
For Service (Required a password.)