4.3
Overview of [INITIALIZE] Menu
Overview of [INITIALIZE] Menu Overview of [INITIALIZE] Menu
Overview of [INITIALIZE] Menu
4-12
4 ARP SELECT
ARPA/ATA
The indication in [ARAP] and [ATA] box on the lower right display
changes according to the setting. The trial maneuver function is not
available on the ATA.
8 OTHER
5 INS
OFF/SERIAL/LAN
Selects TTM output port.
OFF: Jxxx [ECDIS]
SERIAL: Jxxx [TRACK CONTROL]
LAN: Jxxx [NETWORK] This port is two way communication.
Note:
- Set “[Menu] -> 0 -> 6 -> 2.TTM OUTPUT” to “REL” or
“TRUE”. The TTM is outputted.
- When this is set to OFF, “[Menu] -> 2 -> 7: [BARGE MARK]”
menu is displayed to allow the setting of BARGE MARK.
- When this is set to the SERIAL or the LAN, “[Menu] -> 2 -> 7:
[INS MARK]” menu is displayed to allow the ON/OFF setting
of the mark display from INS.
P.4-38
To Next Page
Loading...
