Furuno FCR-2829W - SYSTEM CONFIGURATIONS

iii
SYSTEM CONFIGURATIONS
FCR-2829W
NOTICE
The radar(s) must be interconnected to the following type approved sensors:

Gyrocompass meeting the requirements of the IMO resolution A.424(XI).

EPFS meeting the requirements of the IMO resolution MSC.112(73).

SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing
units having approved LAN ports.
RPU-013
RADAR
PROCESSOR
UNIT
Sub Display 1
Sub Display 2
Gyro Converter
GC-10
Gyrocompass
A-D Converter
Heading Sensor
LAN
110-115/220-230 VAC
1
ø , 50/60 Hz
Transformer
RU-1803
440VAC
1
ø , 50/60 Hz
Brake Unit
BR-001/002
EC-3000
PROCESSOR
UNIT
Serial 1, 2
IEC-61162-2
(Gyrocompass
1)
, AIS)
Serial 3 - 8
IEC-61162-1
(EPFS
2)
(navigator),
SDME
3)
(Speed Log),
Echo sounder,
Wind, Alarm****,
Navtex, etc.)
Digital Out 1 - 6****
1: System Fail
2: Power Fail
3: Normal Close 1
4: Normal Close 2
5: Normal Open 1
6: Normal Open 2
Dashed lines indicate
optional or local supply
equipment.
Sensor Adapter**
or Switching HUB HB-100
Radar Control
Unit RCU-025
OR
Trackball Control Unit
RCU-026
ECDIS Control Unit
RCU-024
OR
Radar Control
Unit RCU-025
OR
Trackball Control Unit
RCU-026
Monitor Unit
MU-231*
Digital In (ACK IN)
VDR
Intelligent Hub
HUB-3000
100-115/220-230 VAC
1
ø , 50/60 Hz
JB***
XN20AF-RSB-103
XN24AF-RSB-103
Antenna Unit
Performance Monitor
Transceiver unit
RTR-081
Waveguide
WRI-84 (WRJ-9)
or FR-9
RU-3305
100 VAC, 1ø, 50/60 Hz
100/115/220/230 VAC,
1ø, 50/60 Hz
(For de-icer)