Furuno FELCOM19 Inmarsat Mini-C MES - Page 31

3. SYSTEM INITIALIZATION
3-3
8. Select [Window Color] then press the Enter key.
9. Set the window colors as follows:
1) [Select Preset] provides three preconfigured window color sets. Use one of
these sets, or continue this procedure to customize window colors.
2) Select [Window]. Use ← or → key to select the window for which to select col-
or.
Base Window: Standby display
RCV Message Display: Receive message display
EGC Message Display: EGC message display
EDIT1 - EDIT2: Editor screens 1 and 2
Function: Menu
Sub Menu 1 - Sub Menu 4: Sub menus 1-4
Message: Status message
Preset
No.
Window Fore Color Back Color
1 Base Window L-WHITE BLUE
RCV Message Display WHITE BLACK
EGC Message Display WHITE BLACK
EDIT 1 BLACK GREEN
EDIT 2 MAGENTA WHITE
Function BLACK CYAN
Sub Menu 1 BLACK WHITE
Sub Menu 2 BLUE WHITE
Sub Menu 3 L-WHITE BLACK
Sub Menu 4 WHITE BLACK
Message WHITE MAGENTA
Window Color
Select Preset 1 2 3
Load Default
- - - - - - - - - - - - - - - - - - - - - - -
Edit Color
Window [ Base Window ]
Fore Color [ L-WHITE ]
Back Color [ BLUE ]
- - - - - - - - - - - - - - - - - - - - - - -
To Change: ENTER To Change Value:L<=>R