3. SYSTEM INITIALIZATION
3-5
3) Select [Fore Color].
4) Use ← or → key to select a color.
5) Select [Back Color].
6) Use ← or → key to select a color.
7) To select colors for other windows repeat steps 2)-6).
10. Press the Enter key to show the [Update] window.
11. [Yes] is selected; press the Enter key.
12. Long-press the Esc key to return to the standby display.
To restore all default color settings, select [Window Color] from the [Terminal Setup]
menu, select [Load Default], press the Enter key then press the Enter key again.
1:
2:
|
|
|
|
|
|
|
MENU
< [1] UNTITLED1 >
EDIT
BASE WINDOW
CAUTION
MESSAGE
File Edit Transmit EGC Reports Logs Options Setup StopAlarm
To Next Page
Loading...
