Furuno FELCOM251 - How to Edit Text; Password

1. BASIC OPERATION
1-12
1.5.3 How to edit text
Edit text at the text input screen.
1. At the text input screen, put the cursor on the text to correct.
2. Press . One character erases.
Note: To erase all characters to the right of the cursor, press and hold the
key.
3. Input the correct character(s).
1.6 Password
See the following table for information on passwords:
*: The default administrator password is the same for both the Web Interface and all
connected handsets.
If the password is changed (see section 6.10) and a handset is not connected to the
Communication Unit, that handset retains the old password.
When the handset is connected to the Communication Unit, the handset password
is automatically updated.
Item Username
Default
Password
Use
Password
Update
IP Handset Admin Administrator
password*
(Fb1234567890)
When logging
in as an admin-
istrator.
See section 6.10.
Web
interface
Log Log password
(Lg1234567890)
When opening
[Log] on the
menu bar.
Admin Administrator
password*
(Fb1234567890)
When logging
in as an admin-
istrator.
Not required. SMS
password
(Sms251501)
When opening
[SMS] on the
menu bar.
User defined. PPPoE
password
When connect-
ing to the inter-
net by PPPoE.
See step 6 in
section 6.8.2.