Furuno FELCOM251 - How to Change the Font Size; How to Change LCD Brightness; How to Change the Key Brilliance

3. SETTINGS FOR IP HANDSET
3-3
3.2.1 How to change the font size
1. In the [Display] menu, press S to select the [Font Size] menu, then press the En-
ter key.
The [Font Size] screen appears.
2. Press W or X to select the font size ([Small] or [Large]), then press the Enter key.
The font size is shown in the [Sample] area.
3. Press the Enter key to confirm the settings.
The message "Applied." appears.
4. Press the key to go back to the main screen.
3.2.2 How to change LCD brightness
1. In the [Display] menu, press S or T to select the [LCD Brilliance] menu, then
press the Enter key.
The [LCD Brilliance] screen appears.
2. Press W or X to adjust the LCD brilliance level (1 to 10), then press the Enter key.
3. Press the Enter key to confirm the settings.
The message "Applied." appears.
4. Press the key to go back to the main screen.
3.2.3 How to change the key brilliance
1. In the [Display] menu, press T to select the [Key Brilliance] menu, then press the
Enter key.
The [Key Brilliance] screen appears.
2. Press W or X to adjust the key brilliance level (0 to 3), then press the Enter key.
3. Press the Enter key to confirm the settings.
The message "Applied." appears.
4. Press the key to go back to the main screen.