Furuno FELCOM251 - Page 77

5. WEB INTERFACE
5-5
System message area
System errors and other events appear in the system message area. The messages
are listed in order from highest to lowest level of priority as follows:
Restart icon
The restart icon appears when a setting change requires the restart of the FEL-
COM251 or FELCOM501.
Click the restart icon. The message "The system will restart. Are you sure?" appears.
Click [OK] to restart the system. The message "Completed. Wait a moment for the re-
start." appears. Click the [Close] button then wait for the restart to complete.
Automatic update icon
Click the automatic update icon to activate/deactivate the automatic update function.
The refresh rate (update cycle) for each item is listed in the following table.
The icon appears in blue color when the function is active, white when inactive.
Language
Displayed as "English".
Login icon
Click the login icon to log in or out as a Log user or Administrator. The color of the icon
is blue when logged in; white when logged out. See section 6.1.
Priority Icon Description
SIM error SIM is not available.
Error There is a problem which may affect equipment startup and
operation.
Warning Possibility of equipment failure.
Item Refresh rate
Signal strength indication Every 10 seconds
System message area
System time/date
Status monitor indications (see section 5.3) Every 5 seconds
Data connection screen (see section 5.4.1)
Active
(Blue)
Inactive
(White)
Click the icon
to switch
Logged in
(Blue)
Logged out
(White)