FUTABA 10J - Helicopter Control Modes and Swashplate

122
Helicopter
Function
Method
①Callthemenuscreenfromthe
homescreenby pressingthe +
keyfor1second.
＋
② Select
fromthemenuwiththe
Jogkey.
③Openthesettingscreenby
pressingtheJogkey.
（1second）
Callingthesettingscreen
The condition switches (idle up 1/2/3 and throttle
hold switch) are not operative at initial setting.
Switch setting is performed in advance with the
condition select function.
ŏ,QLWLDOO\VHWWRLGOHXS6Z(FHQWHULGOHXS6Z(
IRUZDUGLGOHXS6Z)IRUZDUGWKURWWOHKROG
6Z*IRUZDUG
"CONDITION"
CONDITION
Conditionselect
(Idle-up・Throttlehold)
(HELICOPTER)
■ Activatingthefunction
＋ −
or
①Selectthe"INH"itemofthe
conditionyouwanttouseandset
itto"ON"or"OFF"bypressingthe
+keyor‒key.
● Setconditionsyoudonotwanttouseto"INH".
（Inthecaseofchangeofaswitch）
■ Switchselection
＋ −
or
②Acursorismovedto
"Switchselection"and
aswitchischangedby
＋ keyor − key.
Range：SwA 〜 SwH
Default：SwE（IDLE-UP1/2）、
SwF（IDLE-UP3）、SwG（THR-HOLD）
■ Switchdirection
＋ −
or
③Acursorismovedto
"Switchdirection"and
aswitchdirectionis
changedby＋ keyor −
key.
Range：
● 2PSW：NULL,UP,DOWN
● 3PSW：NULL,UP,UP&D,UP&C,CNTR,C&DN,
DOWN
Conditionselect
Idle-up
setting
Throttlehold
setting
● WhennotusingthisFunction
selectINH. Thedisplayof On/
Offisshownwhenactiveand
assignedtoaswitch.
● Selectthesettingitem
withtheJogkey.
（Activatingthefunction） （Switchdirection）
（Switchselection）
&21',7,21