FUTABA 10J - Hovering Throttle

143
Helicopter
Function
Method
①Callthemenuscreenfromthe
homescreenby pressingthe +
keyfor1second.
＋
② Select
fromthemenuwiththe
Jogkey.
③Openthesettingscreenby
pressingtheJogkey.
（1second）
Callingthesettingscreen
The hovering throttle function trims the throttle
near the hovering point.
When the hovering throttle knob is turned
clockwise, the speed increases and when it is turned
counterclockwise, the speed decreases. Rotor
speed changes due to changes in the temperature,
humidity, and other flying conditions can be
trimmed. Adjust for the most stable rotor speed.
More precise trimming is possible by using this
function together with the hovering pitch function.
ŏ7KHRSHUDWLRQFRQGLWLRQFDQEHVHOHFWHGIURPRQO\
QRUPDORUQRUPDOLGOHXS
"HOV-THR"
HOV-THR
Hoveringthrottle
(HELICOPTER)
■ Activatingthefunction
＋ −
or
①Selectthe"MIX"
itemandthen
selectthe"ON"by
pressingthe+key
or‒key.
● Whenyoudonotuseafunction,setto
the"INH"side.
■ Selectionofcondition
＋ −
or
②Selectthe"MODE"item
andthenselectcondition
bypressingthe+keyor‒
key.
Range：NORM,NORM/IDL1
Default：NORM
■ VRsetting
③ Selectthe"VR"itemandthenselectthe
"VR"or"DT"bypressingthe+keyor‒
key.
Range：NULL（OFF）,+VR,-VR,+DT5,-DT5,
+DT6,-DT6
Default：+DT6
（Memorizingthehoveringthrottleadjustmentposition）
■ Memorysetting
④Select the"RATE"itemandmemorizethe
currenttrimpositionbypressingtheJog
key.
● Whentheknobisreturnedtothecenterafter
memorization,thetrimpositionreturnstoits
previousposition.
［NOTE］Ifmemorizationisrepeatedatthesame
position,thevalueiscumulated.
HoveringThrottle
Activatingthefunction
Trimmemorysettting
VRsetting
Selectionofcondition
● When"INH",thefunction
cannotbeused.Tousethe
function,switchto"ON".
（Compensationamountattrim
memory）
（Actualcompensationamount
includingthehoveringthrottle
knob）
● Theknoboperatingdirection
isdifferentdependingonthe
polarity.
● Selectthesettingitem
withtheJogkey.
● NORM：Onlythenormalconditionoperates
● NORM/IDL1：Itoperatesbynormalconditionand
idle-up1.
+297+5