Before Use
Slide Lever
LST (Left), RST (Right):
Outside levers
LS (Left), RS (Right):
Inside levers: Each lever has two ends, one at the
front and the other at the back of the transmitter.
*It will beep when the lever is set to the center.
in the linkage menu.
on the setting screen of mixing functions.
Volume
Back side switch
Volume LD and RD:
Two volumes can be assigned to each function.
*It will beep when the lever is set to the center.
linkage menu.
Switch SI, SJ:
in the setting screen of the each functions.
SI
LD
RD
SJ
LSTRST LSRS
To Next Page
Loading...
