FUTABA 32MZ User Manual


＜
Linkage Menu
＞
HELICOPTER
AIRPLANEGLIDER
-Response speed has
priority over number
of channels
-Telemetry requires
only the current
receiver battery
-Want to use a
previously used
receiver as is
-Want to use a
miniature receiver
for indoor planes
-Want to use an
S-FHSS system
miniature receiver
-Want to use an
T-FHSS system
receiver
(
Usable receivers)
-Want to use more channels
-Want to use a large number
of telemetry functions
(The time of april, 2019)
-Want to use a large
number of telemetry
functions
-Telemetry is
not used
T-FHSS Air-mono
FASSTest 18CH
FASSTest 12CH
FASST MULT
FASST 7CH
S-FHSS
T-FHSS Air
R608FS
R6008HS
R6108SB
R6208SB
R6014HS
R6014FS
R6203SB
R6203SBE
R6202SBW
R6303SB
R6303SBE
R7006SB
R7014SB
R7018SB
R7108SB
R7003SB
R7006SB
R7008SB
R7014SB
R7018SB
R7108SB
CGY760R
R7003SB
R7006SB
R7008SB
R7014SB
R7018SB
R7108SB
CGY760R
R617FS
R6004FF
R616FFM
R6106HF
R6106HFC
R6203SB
R6202SBW
R6203SBE
R6303SB
R6303SBE
R7006SB
R7108SB
R2006GS
R2106GF
R2001SB
R2008SB
R2000SBM
R3001SB
R3004SB
R3006SB
R3008SB
CGY760R
R3106GF
R3206SBM


If the receiver of FASST and S-FHSS is used, the
methods of a link differ.






 
 


*Follow the manual of the receiver to be used.
Moreover, carry out an operating check.
System type
■ FASSTest 18CH ---
■ FASSTest 12CH ---
■ FASST MULTI ---
■ FASST 7CH --- FASST-7CH system receiver mode. Up to 7 channels can be used.
■ T-FHSS Air ---
■ S-FHSS --- S-FHSS system receiver mode. Up to 8 channels can be used.
FASSTest system receiver mode. Applicable with the telemetry sensor unit. Up to 18
channels (linear 16+ON/OFF2) can be used.
T-FHSS system receiver mode. Applicable with the telemetry sensor unit. Up to 18
channels (linear 16+ON/OFF2) can be used.
FASSTest system receiver mode. Applicable with receiver voltage display. Up to 12
channels (linear10+ON/OFF2) can be used. Telemetry Sensor cannot be used, but the
response speed is faster than that of the 18CH mode.
FASST-MULTI system receiver mode. Up to 18 channels (linear 16+ON/OFF2) can be
used.
•
Analog servos cannot be used with the R7108SB in the FASSTest 12CH mode.
In case of
FASST/S-FHSS, a Link
button of the receiver is
pressed for a link.

FUTABA 32MZ Specifications

General

Brand	FUTABA
Model	32MZ
Category	Remote Control
Language	English