Before Use
Stick Adjustment
Adjustment of the stick lever angle
either inwards or outwards from the center stick position.
Use the attached 1.5 mm hexagonal wrench (inside
outwards, or counter-clockwise to tilt it inward.
Note:
Be careful not to turn the screw too far counterclockwise
as it could fall out.
Adjustment of the lever length
sticks in line with your hand size.
1. Hold the lever head "B" and turn the lever head "A"
counter-clockwise, the lock will be released.
2. Adjust the stick lever to the desired length by
turning lever head A.
3. Securely lock the stick lever by holding lever head
A and turning lever head B counterclockwise.
To Next Page
Loading...
