＜
Linkage Menu
＞
HELICOPTER
AIRPLANE
GLIDER
Do not perform the linking operation when the
drive motor is connected and the engine was
started.
■
Inadvertent rotation of the motor or acceleration of the engine
Once the link operation is complete, please
check that your receiver can be operated with
the linked transmitter.
C
linking.
■
If the same receiver is sending in the vicinity, there is the
danger that the transmitter may be linked with that receiver.
Always turn on the transmitter power after
linking is complete.
When pairing with the transmitter, be sure
that a previously linked transmitter is not
transmitting
↔
To Next Page
Loading...
