FUTABA 32MZ - SYSTEM MENU; System Menu Overview


＜
System Menu
＞
HELICOPTER
AIRPLANEGLIDER
  





Starts and sets the trainer system.
Display adjustment and auto power off setting.
Sets the date and time (system clock setting) and resets the timer.
User name registration and ID Pin number.
Toggle switch type setting (Set when the switch is replaced.)
Hardware reverse/Stick setting/Calibration.
Adjust the volume of: Key Operation/Error Warning/Trim & Center Click/Timer Event

S.BUS servo setting.
Displays the program version, microSD card information, and product ID.

The output of the transmitter is lowered, for Range checking.
The System Menu sets up functions of the transmitter,
this does not set up any model data.