FUTABA 3PJ Super - Reference; Technical Specifications

100
Reference
Reference
Ratings
*Specifications and ratings are subject to change without prior notice.
Transmitter T3PJ SUPER
(Wheel system, 3 channels)
- Transmitting frequencies 27, 29, 40,
41 or 75MHz band
(TJ-FM RF module used)
- Modulation FM
(PCM<->PPM switching possible)
- Power requirement
(Ni-cad battery)
NT8F700B Ni-cad battery (9.6V)
(Dry cell battery)
Penlight X 8 (12V)
- Current drain 250mA or less
Receiver R113F/R113iP
(3 channels, FM receiver/PCM re-
ceiver)
- Receiving frequencies 27, 29, 40, 41
or 75MHz band
- Intermediate frequency 455kHz
- Power requirement 4.8V or 6V
(shared with servos)
- Current drain 18mA
- Size 42.7x28.7x16.0mm
(1.69x1.13x0.63in)
- Weight 18g/21g (0.63oz/0.74oz)
Servo S9402
(Coreless/High Output servo)
- Output torque 8.0kg-cm (111.1oz-
in)
- Speed 0.10 sec/60 degree
- Power requirement 4.8V or 6V
- Size 40.5x20x37.5mm
(1.59x0.78x1.48in)
- Weight 55g (1.9oz)
Servo S9304
(Coreless/High Torque servo)
- Output torque 5.0kg-cm (69.4oz-in)
- Speed 0.22 sec/60 degree
- Power requirement 4.8V or 6V
- Size 40.5x20x35.5mm
(1.59x0.78x1.40in)
- Weight 50g (1.76oz)