FUTABA 3PJ Super - Page 68

68
SELECT Mode Functions


6. (Prealarm setting)
Call the prealarm set-up
screen by pressing the SE-
LECT key once.
7. Set the prealarm time with the
+ or - key.
Setting range: OFF, 1~30s
s: second
- Return to the initial value (OFF)
by pressing the + and - keys si-
multaneously for about one sec-
ond.
8. (Navigation time setting)
Call the navigation time set-
up screen by pressing the
SELECT key once.
9. Set the navigation time with
the + or - key.
Setting range: 3s~30m
s: second, m: minute
- Return to the initial value (3S) by
pressing the + and - keys simulta-
neously for about one second.
10.At the end of adjustment.
press the UP key twice, or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
- 2 times
Blink
Blink
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP
+
SETUP RESET
SELECT DOWN
-
TH.EXP ATV CUSTOM