Profession Laser Manufacturer more than 15 Years.
7
environment.
f)
Install ground surrounding are not requested have big vibration.
g)
Chiller is used for cooling laser, cutting head etc. specialized equipment,
and cooling circulating water requires use high quality pure water or
distilled water.
h)
For prevent fire happen, working place should equipped with suitable fire
extinguisher and obligate certain fire channels.
i)
The left and back of the machine tool should be away from the workshop
wall in more than 1.2 M; around the laser should be in 1.0 M away from the
walls.
j)
Control unit, servo unit, display and control panel are the core parts of the
machine tool, it has certain requirements for the environment, and should
avoid machine suffer from electromagnetic interference, such as arc
welding and discharge machine, etc., in order to affect the normal work of
the machine.
2.4 The impact on the environment and energy
The laser of laser cutting machine belong to fourth class of laser products,
its injection beam and diffuse reflection light can cause damage to the human
body (especially the eyes), the operator and the present personnel should be
paid attention to protection, must be protective glasses, the model can choose
SD - 4, specification of 1064 nm.
2.5 Products Construction and working principle
2.5.1 Overall structure and its working principle, working characteristic
LF1390 series fiber cutting machine, the main components are: host
machine parts, control system, laser, water chiller, transformer, gas
equipment, etc. Host machine parts: host machine parts is the main part of
the laser cutting machine, main engine parts consistent of lathe bed, beams,
workbench, gas path and water path. Other auxiliary peripherals including
water chillers, variable pressure system.
2.5.2 Main component or functional unit of the structure, function and
working principle
Lathe bed made from Q235 welding, welding using annealing method to
eliminate casting stress(thermal aging), and one-off and stress relieving more
thoroughly, reduce the deformation of lathe bed, ensure the accuracy of
machine tools remain unchanged for a long time
Using aluminum beams, through advanced heat treatment technology,
has high strength, light weight, good rigidity, etc.
Work units are overall welding structure, has good strength and stability.
d Electrical control part
To Next Page
Loading...