Profession Laser Manufacturer more than 15 Years.
2
Warning: Be care of the high temperature
The laser head will produce a high temperature in its
surface, please don’t touch the laser head when its
working or shortly after its working.
Warning:Be care of the low temperature
When using the liquid nitrogen to cutting the
materials ,the user’s hand may hurt by the lower
temperature gas tank .Please wear the gloves when
connecting the gas tank with the machine
Warning: It’s not allowed to open the door ,put your
hands body into the moving area during machine
running process
1.4 Security management warning
a). Specify the security administrator, determine scope of their duties, and
laser processing operator must get safety education and read the use
guide manual.
b). Specify laser safety management area, set up warning card in the
management area
’
s entrances and exits, content including: power of laser
machine, laser type, not allowed to enter, protect eyes and security manager's
name, etc.
c). Our company would undertake a training activity(face to face or training on
the Internet) to the customer. Operator of laser processing machine, must
receive special training, to reach a certain level, and on the premise of
security administrator agree, then operate the machine.
1.5 Laser safety notice
The laser source of this machine is belong to 4 class laser.The main harm
to human body are the eyes and skin, laser light to any part of the human
body can cause burns.Especially long time watching fiber laser will cause
the retina serious damage to the eyes! Avoid to put any parts of the body
in flight path of laser equipment, in order to avoid damage due to incorrect
operate.
To Next Page
Loading...
