Profession Laser Manufacturer more than 15 Years.
28
Fiber laser : we suggest you clean the fiber part on the laser head to avid dust
enter into fiber connector, and insert the fiber plug in horizontal state.
More details please refer the water cooling machine user manual.
1. Take off the protective film or protective lid on fiber connector.
2. Insert the fiber plug into the fiber connector.
3. Twist and lock the fiber plug on fiber connector.
4. Do not twist or lock too tight, or it will break the QBH connector and fiber plug.
Installation attention
1. Lens avoids direct contact with hands;
2. Positive and negative duty to clear lens;
3. Use special tool, dismantling the lens
4.5 The connection of the gas
1. Connect the gas pipe with the gas valve then connect the valve with the
gas bottle.
2. Clockwise to tighten connection fixing nuts block.
Please plug the gas pipe into the ports which marked on the picture then
clockwise to tighten connection fixing nuts block.Please choose the port
according to the gas you use
.
Picture 4-20
The connection of the gas work
To Next Page
Loading...
