Profession Laser Manufacturer more than 15 Years.
29
The machine equipped fiber laser,no need any dedicated laser gas!
b)The connection of auxiliary gas
1) Cutting gas requirements of purity
(The user should by the pressure in local markets and check the pressure
according to the gauge manual. The following picture4-21,4-22 is just for your
reference The N
2
gauge is same with compressed air gauge )
Picture 4-21 Oxygen pressure gauge
Picture 4-22Nitrogen pressure gauge
1) Gas for cutting consumption
Cutting gas consumption related variables as below:
Carbon steel
etc(materials which
less requested)
To Next Page
Loading...