Profession Laser Manufacturer more than 15 Years.
53
Turn the button from “ON” to “OFF” position as shown in the picture 5-25 to picture 5-
26.
4. Turn off the air compressor valve and power supply
A.
To manually drainage, discharge of oil, air compressor, will be at the bottom of
the air compressor air tank drain valve open drainage, after the treated waste
water discharge, close the drain valve.
B.
Drain the air purifier by hand (not install automatic drainer), discharge of oil, will
be the clean air, open the drain valve at the bottom for drainage after the treated
waste water discharge, tighten the drain valve.
5. Off the dryer Turn, tools machine,computer host,supply power, power supply
regulated, the external main and switch.
Picture 5-27 Picture 5-28
Turn off the main switch from the
“
ON
”
position to
“
OFF
”
position as shown in the
picture 5-27 to picture 5-28.
6. Cutting head nozzle prevent, dust in the Seal air into the focusing lens.Paste a
laser head on the head.
7. Machine surrounding environment condition check whether there is a fire or high
temperatures o b j e c t the fire prevention eliminates safety hidden trouble
Patrol.
To Next Page
Loading...
