4. Operating System and Equipment
Manually
Adjust Headlight Height
Manually a
djust the range of headlights (low
beams) at positions 0, 1, 2 or 3 considering the
vehicle posture variation due to occupant and
luggage weight.
Position Light
– By turning the light switch to
position to
turn on position lights, the position lights,
instrument panel lighting lamp, number plate
lights are turned on and
in the instrument
cluster is on accordingly.
– If you forget to turn off the position lights, after
the Start or Ignition switch is at “OFF” position
and the car is locked for 15 minutes, these
lights will go out automatically to save battery
power.
Warning
Do not turn on the position lights only
when driving the car at night or in poor
visibility, otherwise, it can cause accidents
easily. Turn on low beams when driving at night
or in poor visibility environments.
Day
time Running Light*
– With the engine started, the daytime running
lights can be automatically turned on. When
the position lights are turned on or the engine
stops work, the daytime running lights will be
automatically turned off.
Hint
"Daytime running light" function is optional,
and can be activated or deactivated via "Car
Setting" under the audio system*. => Refer to Page
205
To Next Page
Loading...
