4. Operating System and Equipment
Fog Lights
– Switch
the Start or Ignition switch to “ON”
position.
– Turn the light switch to
or position.
– Turn the fog light switch from OFF to
position
to turn on the front fog lights.*
– Turn the fog light switch from
position to
position, and release it to let it return to
position,
in order to turn on rear fog lights.
Repeat the process to realize changeover
between the mode of only front fog lights* on
and the mode of both front fog lights * and rear
fog lights on.
– Turn the fog light switch to OFF position to
turn off front fog lights* and rear fog lights.
Hint
• For certain models not equipped with front fog
lights, when the light switch is turned to
or
position, rear fog lights are turned on if the
fog light switch is turned to
position.
• When the front and rear fog lights are on, all
the lights can be turned off by turning the light
switch to "OFF" position; in this case, the front
fog lights * can be turned on again by turning
the light switch to
or position while the
rear fog lights can be turned on again by using
the fog light switch.
Hazard
Warning Indicator Light
With the
Start or Ignition switch at any position,
if
switch is pressed, the red background light of
the switch is on, i.e. the hazard warning indicator
light turned on. After the switch is pressed again,
the light is turned off.
After the hazard warning indicator light is
turned on, all the turn signals flash at the same
time, together with the
and in the instrument
cluster.
To Next Page
Loading...
