4. Operating System and Equipment
AUT
O: Aut
o
m
atic Wiping*
– If the wiper combination switch lever is pushed
to ③
AUTO
position,
the front wi
pers
will
work
automatically,
and the wiper system will adjust
the wiping speed based on the current rainfall
and real-time vehicle speed.
– The wiper sensitivity can be adjusted by
turning up/down the knob ⑦
. The sensitivity
increases from up to down.
Caution
• Worn or dirty wiper blades will affect the
visibility adversely and reduce driving safety.
•
When the instrument cluster display prompts
"The sensor fails, please control the wipers
manually", for the sake of safety, the wipers
will keep operating at a low speed. In this
case, you can choose to control the wipers
manually based on actual situation, and go to
the authorized GAC MOTOR dealer
timely to
have your car checked and repaired.
• Before auto wiping in winter, make sure the
wiper blades are not frozen
.
INT: Intermittent Wiping*
– If
the
wiper
combination switch lever is pushed
to ③INT position, the front wipers will work
intermittently at a certain frequency.
– The wiping frequency can be adjusted via ⑦.
The time interval between wiping increases
from up to down when th
e knob ⑦
is turned
up/down.
LO: Low-Speed Wiping
– If the wiper combination switch lever is pushed
to ④LO position , the front wipers will work at
a
low speed.
HI: High
-Speed Wiping
–
If the wiper combination switch lever is pushed
to ⑤
HI posit
ion
, the front
wipers
will
work at
a high speed.
To Next Page
Loading...
