5. Driving Guide
Gear Instructions for Vehicle Models w
ith
Manual Transmission
Gear positio
ns of the models equipped with
manual transmission are R, 1, 2, 3, 4, and 5.
Depress the clutch pedal to full range in case
of gear shift during driving to switch the shift lever
to the gear positions of 1, 2, 3, 4 or 5.
Switch to reverse gear
– Depress the clutch pedal to full range when
the vehicle is not running and the engine is
idling.
– Make sure that the shift lever is at neutral gear.
– Switch the shift lever to “R” gear. At this time,
the reversing light will automatically light up,
and the reversing system will automatically
start. => Refer to Page 309
Hint
Before switching to "R" gear, make sure that the
vehicle is completely stopped and that the
engine speed cannot be too high. Otherwise,
the transmission can be damaged or even an
accident may occur.
● Use soft power to gear shift and avoid
excessive force.
• Avoid starting at high speed.
● Do not put your hands on the shift lever during
the driving, so as not to break the fork
prematurely.
Driving Instructions for Vehicle Models wi
th
Automatic Transmission
– Start the
engine. => Refer to Page 274
– Press the unlock button on the front side of the
shift lever, and put the shift lever to R/D/S
position.
– Remove the parking brake.
– Release the brake pedal and slowly depress
the accelerator pedal to start the car.
– Depress the brake pedal to stop the car
steadily;
To Next Page
Loading...
