5. Driving Guide
In orde
r to ensure safety, the AUTO HOLD
function activated will be disabled and the parking
brake will be locked in the following conditions:
1. The engine is shut down.
2. The driver side door is opened or the seat belt
is unbuckled in stop state.
3. Press the AUTO HOLD button to cancel the
AUTO HOLD.
Caution
When the car is transferred via conveyor belt
to cleaning device and other devices, the AUTO
HOLD function must be disabled. Otherwise, the
car cannot move or may deviate from the driving
track.
EPB Adaptiv
e Learning
In some cases (e.g. the battery suffers power
failure suddenly, or the car has not been used for a
long time), the red indicator light
will flicker, and
manually pulling the EPB button will cause EPB
unable to work. In this case, the driver shall
depress the brake pedal and press EPB button to
make EPB execute adaptive learning, enabling
EPB to work normally.
To Next Page
Loading...
