8. Handling of Accident
Lifting the Vehicle
– Find the jacking point nearest to the flat tire.
Place the jack under the jacking point.
– Lift the jack and align the groove of the jack
with the protruding beam under the body.
– Che
ck whether the jack is placed steadily and
fits the ground tightly.
– Assemble the wrench for removing wheel bolts
as well as special wrench for jack, and jack.
– Lift the jack in direction of the arrow to lift the
vehicle and make the tire off the ground.
Caution
fter loosening the bolts of the flat tire, execute
lifting and other subsequent replacement
operations, so as to facilitate wheel bolt
disassembly.
Warning
● Make sure the jack is used on firm and
level ground.
● Make sure the jack is placed under the
proper jacking point.
● Follow the precautions for operating the
jack.
● Disconnect your vehicle from the trailer (if
equipped).
• When lifting the car, continually observe its
conditions. If the car inclines obviously,
stop lifting and find out the cause before
trying again.
To Next Page
Loading...
