8. Handling of Accident
Remov
i
ng the Flat Tire
–
Remove the wheel bolts with the wrench with
the tire off the ground.
– Remove the flat tire.
Installing th
e Spare Tire
– Mount the spare tire
on the vehicle.
– Install all wheel bolts, and pre-tighten them
with the wrench as per the orders 1-5 shown in
the figure.
– Lower the vehicle.
– Tighten all wheel bolts with the wrench.
Caution
• Tighten them in a diagonal sequence.
•
fter installing the wheel, go to GAC MOTOR
dealer to inspect the tightening torque of wheel
bolts as soon as possi
ble.
•
Tightening torque of bolts: 125±10N·m
Warning
Keep the threads of the wheel bolts and
hub clean, and make sure the bolts can be
screwed easily. No grease or other attachment
is permitted.
To Next Page
Loading...
