Console module »DP-HR-CON-MC4«
103 · Computer and console modules (DP-HR)
DisplayPort Out 3: Connect the third console monitor.
DisplayPort Out 4: Connect the fourth console monitor.
Connection to the matrix switch
Transmission 1: Connect this interface to a Dynamic Port (RJ45) of the matrix switch.
Transmission 2: Connect this interface to another Dynamic Port (RJ45) of the matrix
switch.
Transmission 3: Connect this interface to another Dynamic Port (RJ45) of the matrix
switch.
Transmission 4: Connect this interface to another Dynamic Port (RJ45) of the matrix
switch.
NOTE:
Use category 5e (or better) twisted pair cables to connect the devices.
ADVICE:
You can also connect the console module directly to a compatible computer
module.
NOTE:
Use category 5e (or better) twisted pair cables to connect the devices.
Transmission 4
DisplayPort Out 4
Transmission 3
DisplayPort Out 3
Transmission 2
DisplayPort Out 2
Transmission 1
Micro In
Speaker
Keyb./Mouse
Generic
Main Power
Red. Power
Mouse
Keyb.
Transmission 2
DisplayPort Out 2
Transmission 1
LED Out
DisplayPort Out 1
Transmission 4
DisplayPort Out 4
Transmission 3
DisplayPort Out 3
Transmission 2
DisplayPort Out 2
Transmission 1
To Next Page
Loading...
