G&D DP-HR-CPU Installation And Operation Manual

Computer module »DP-HR-CPU-MC2«
15 · Computer and console modules (DP-HR)
Computer module »DP-HR-CPU-MC2«
With DP-HR-CPU-MC2 computer modules, you can connect a computer with Display-
Port graphics outputs (dual-head) to a digital matrix switch of the ControlCenter-Com-
pact or ControlCenter-Digital series.
Users at the consoles of the matrix switch can access the computer module and operate
the connected computer.
Package contents
 1 × Computer module DP-HR-CPU-MC2
 2 × DisplayPort video cable (DP-Cable-M/M-2)
 1 × USB device cable
 2 × Audio cable
 1 × Power pack (12V/2A, only with variants incl. PowerPack)
 1 × Power cable (only with variants incl. PowerPack)
 1 × »Manual information« flyer
 1 × »Safety instructions« flyer
Required accessories
 2 × Category 5e (or better) twisted pair cables to connect the computer module to
the matrix switch
IMPORTANT: Only consoles configured for multi-monitor operation via channel
grouping can show the images of both of the computer’s video outputs on separate
monitors.
At consoles with one monitor only, the image of the computer’s second video out-
put is not displayed.

G&D DP-HR-CPU Specifications

General

Brand	G&D
Model	DP-HR-CPU
Category	Control Unit
Language	English