180 · Computer and console modules (DP-HR)
The console modules and the computer modules for the digital matrix switch can be
operated in extender mode.
Connect a console module directly with a compatible computer module. Use the
same cable types as for the connection of a matrix switch (see Installation).
The modules auto-recognise direct connections. The computer connected to the
computer module is operated at the console module.
Opening the OSD in extender mode
In extender mode, you can change the console module settings in the module’s OSD.
You can use the configured hotkey to open the OSD at the console.
How to open the OSD:
1. Press Alt+Num (default) to open the OSD.
NOTE:
The modules can also be used with products from other product series in
mixed operation.
If you have questions about compatibility, please contact the support team.
NOTE:
When the modules are connected to a matrix switch, the modules are con-
figured in the OSD of the matrix switch.
The matrix switch manual describes the OSD settings.
Configuration
Hotkey...
EDID...
Keyboard/Mouse...
Mouse utility...
Console utility...
Information...
ESC: Exit
D
Extender mode
To Next Page
Loading...
Need help?
General
