Console module »DP-HR-CON-2-Fiber«
Computer and console modules (DP-HR) · 120
Start-up
Start the console module by pressing the Main Power button of the power pack.
Switching
The buttons on the front panel of the console module or configured key combina-
tions (select keys) let users switch between the connected matrix switches.
How to switch channels via buttons:
Press the button of the desired channel to activate it.
How to switch channels via key combinations:
On the console keyboard, press local hotkey+Select key.
In the default settings, the select keys are Alt+1 (channel 1) and Alt+2 (channel 2).
ADVICE:
The active hotkey configuration is displayed during the System Startup of
the matrix switch and the console module.
To Next Page
Loading...
