Console module »DP-HR-CON-DH«
145 · Computer and console modules (DP-HR)
Connection to the matrix switch
Transmission: Connect this interface to a Dynamic Port (RJ45) of the matrix switch.
Power supply
Main Power: Connect the supplied power cable.
Insert the cable’s Schuko plug in a power socket.
Red. Power: Connect the connection cable of a compatible power pack to provide the
console module with a second, redundant power supply.
Startup
Turn on the console module after its installation. Use the Main Power power pack or a
redundant power pack to establish the power supply:
Turn on the Main Power power pack.
Use an optional power pack to supply the Red. Power socket with power.
NOTE:
Use category 5e (or better) twisted pair cable to connect the device.
NOTE:
You can also connect the console module directly to a compatible computer
module.
Micro In
Speaker Keyb./Mouse
Generic
Main Power
Red. Power
LED Out Mouse
Keyb.
Transmission
DisplayPort
Out 1 Out 2
Main Power
Red. PowerMicro In
Speaker Keyb./Mouse
Generic
LED Out Mouse
Keyb.
Transmission
DisplayPort
Out 1 Out 2
To Next Page
Loading...
