Console module »DP-HR-CON-2-Fiber-DH«
Computer and console modules (DP-HR) · 172
Power supply
Main Power: Connect the supplied power cable.
Insert the cable’s Schuko plug in a power socket.
Red. Power: Connect the connection cable of a compatible power pack to provide the
console module with a second, redundant power supply.
Startup
Turn on the console module after its installation.
Use the Main Power power pack or a redundant power pack to establish the power
supply:
Turn on the Main Power power pack.
Use an optional power pack to supply the Red. Power socket with power.
Switching
The buttons on the front panel of the console module or configured key combina-
tions (select keys) let users switch between the connected matrix switches.
How to switch channels via buttons:
Press the button of the desired channel to activate it.
How to switch channels via key combinations:
On the console keyboard, press local hotkey+Select key.
In the default settings, the select keys are Alt+1 (channel 1) and Alt+2 (channel 2).
Trans. 1
Trans. 2
Mouse
Keyb.
Keyb./Mouse
Generic
Speaker
Micro In
DisplayPort
Out 1 Out 2
LED Out
Main Power
Red. Power
To Next Page
Loading...
