G&D DP-HR-CPU - Page 190

Configuration
185 · Computer and console modules (DP-HR)
How to transmit the EDID profile of the connected monitor to the computer
module:
1. Press the Alt+Num (default) hotkey to open the OSD.
2. Select EDID and press Enter.
3. Select Send monitor‘s EDID and press Enter.
4. Press Esc to close the EDID menu.
How to activate the G&D EDID profile:
1. Press the Alt+Num (default) hotkey to open the OSD.
2. Select EDID and press Enter.
3. Select Install default EDID and press Enter.
4. Press Esc to close the EDID menu.
Activating the support of special PS/2 keyboards
The console module supports the additional keys of the follwoing PS/2 keyboards:
PixelPower Rapid Action, PixelPower Clarity (blue) and SKIDATA1.
How to activate the support of special PS/2 keyboards:
1. Press the Alt+Num (default) hotkey to open the OSD.
2. Select Keyboard/Mouse and press Enter.
3. Select PS/2 Enh. keyboard and press F8 to select one of the following options:
4. Press F2 to save your settings.
NOTE: By activating this profile, you might delete a transmitted EDID profile.
no:
Standard keyboard
PixelPower RA:
Special PixelPower Clarity (blue) keyboard
PixelPower C:
Special PixelPower Rapid Action keyboard
SKIDATA1:
Special SKIDATA1 keyboard
ADVICE: Press Ctrl+F8 to show a list including all options. Select the desired
option and press
Enter.