GAT NET.Lock 7000 System
Technical Data
38
HB_GAT-NETLOCK7000--EN_30
www.gantner.com
6.3 GAT NET.Controller M 7000
Nominal voltage U
DC
: 24 V
Power supply unit: External power supply units (use only power supply units approved by GANT-
NER Electronic GmbH for the GAT NET.Controller 7000)
Average power consumption: -
GAT Lock Network: Max. 8 slave controllers GAT NET.Controller S 7000 at one master con-
troller GAT NET.Controller M 7000
Memory: Internal memory for 10,000 bookings. SD card slot for memory expansion,
log files, firmware update or person lists
Digital inputs: 4 x optocoupler
Digital outputs: 4 x relay
Interface between slave and master: RS 485
Interface between master and server: Ethernet
Connectors: - Master to server (Ethernet): RJ 45
- Slave to master (RS 485): RJ 45
- Supply: MOLEX
Housing material: Plastic (ABS)
Dimensions: 310 x 133 x 42 mm (12.2 x 5.24 x 1.65 inch)
Permitted ambient temperature: 0 to +60 °C
Protection type: IP 40
Protection class: I
Weight: Approx. 600 g
Environment class based on VDS 2110: II (conditions in indoor areas)
_ _
Note:
This manual is valid as from October 17
th
2013. It is subject to change,
amendments and changes can be made without prior notice at anytime!
To Next Page
Loading...
Need help?
General
