Gantner GAT NET.Lock 7000 User Manual

GAT NET.Lock 7000 System
General Information
8 HB_GAT-NETLOCK7000--EN_30 www.gantner.com
2. GENERAL INFORMATION
2.1 System Parts
The GAT NET.Lock 7000 system consists of the following system parts:
Figure 2.1 - System parts of the GAT NET.Lock 7000 system
12. Ethernet Patch Cable
4. GAT NET.Controller S 7000
(Slave Controller)
11. GAT NET.Lock Connector
Coupling for cable con-
nection
6. GAT NET.Power Supply 230V EU
Power Supply Unit
7. GAT NET.Power Plug
5. GAT NET.Controller M 7000
(Master Controller)
1. GAT NET.Lock 7000
2. GAT NET.Lock BoltSet 7100
(for non-metallic doors)
+
10. GAT NET.Lock Cable 4m
(connection cable,
length 4 m)
3. GAT NET.Lock BoltSet 7200
(for metallic doors, includes the
label carrier)
9. GAT NET.Lock Label GEA right
GAT NET.Lock Label GEA NUM right
GAT NET.Lock Label GEA left
GAT NET.Lock Label GEA NUM left
(Front labels in different variants)
8. GAT NET.Lock Tool 7000
(Center punch gauge for
bolt mounting)
13. GAT NET.Lock Basic Set B
GAT NET.Lock Basic Set F
GAT NET.Lock Basic Set ISO
(Five master cards and an as-
sumption of liability sheet)

Gantner GAT NET.Lock 7000 Specifications

General

Brand	Gantner
Model	GAT NET.Lock 7000
Category	Indoor Furnishing
Language	English