Gantner GAT NET.Lock 7020 System User Manual

GAT NET.Lock 7020 System
General Information
16 HB_GAT-NETLOCK7020--EN_12 www.gantner.com
2.5 RFID Technology
Identification of users by the GAT NET.Lock 7020 is done via RFID (radio-frequency identification) using a frequency
of 13.56 MHz. The GAT NET.Lock 7020 (USB) P locks include a 125 kHz reader in addition to the 13.56 MHz reader.
There are different RFID technologies available. The following identifiers are added to the GANTNER product name
to indicate the type of technology the device supports:
- "B": LEGIC
- "F": MIFARE
®
- "ISO": ISO 15693
- "ICLS": HID iCLASS
®
The GAT NET.Lock 7020 and the GAT NET.Controller M 7020 master controller can operate with all RFID
technologies. Different sub controllers can be ordered to suit the type of RFID technology in operation:
- GAT NET.Controller S 7020 B: LEGIC
- GAT NET.Controller S 7020 F/ISO: MIFARE
®
and ISO 15693
- GAT NET.Controller S 7020 ICLS: HID iCLASS
®
All devices and data carriers within a system must use the same technology. The information in this manual is
applicable for all RFID types. If specific information is only valid for a certain type of technology, this will be noted.

Gantner GAT NET.Lock 7020 System Specifications

General

Brand	Gantner
Model	GAT NET.Lock 7020 System
Category	Locks
Language	English