Garage Smart GS100-CR User Manual

GarageSmart
TM
User’s Manual
37
Status Codes
The Status Led of the GarageSmart
™
can be used to determine the connection status of the
GarageSmart
™
device.
Status
Led
Color
Number
of Blinks
Result
Solution
RED
Solid
Reboot started.
Wait a few seconds for reboot process to start.
RED
1
Wi-Fi disconnected or wrong password.
Repeat the procedure Configure the
GarageSmart™ Device to a secure Wi-Fi
network, verifying that the Network Name
(SSID) and password is correct.
RED
2
Searching for Wi-Fi network or wrong
password.
Repeat the procedure Configure the
GarageSmart™ Device to a secure Wi-Fi
network, verifying that the Network Name
(SSID) and password is correct
RED
3
Error Occurred
Repeat the procedure Configure the
GarageSmart™ Device to a secure Wi-Fi
network, verifying that all settings entered
match your router settings.
AMBER
1
GarageSmart™ device is connected to
the router; however the internet
connection has been lost.
Verify and restore internet connection.
AMBER
2
GarageSmart™ device is connected to
the router. However, the Device ID is
invalid on the GarageSmart™ network.
Contact GarageSmart for assistance.
AMBER
3
GarageSmart™ device is connected to
the router. However, Port Forwarding has
not been set up properly within the router.
Perform the section called, Router Security
Configuration.
GREEN
1 or 2
The GarageSmart™ device has
successfully connected to the router and
is fully online.
No action is required.
GREEN
Solid
The GarageSmart™ device is
downloading new firmware.
Wait for the download to finish as the device
will eventually reboot.

Garage Smart GS100-CR Specifications

General

Brand	Garage Smart
Model	GS100-CR
Category	Garage Door Opener
Language	English