Controlling the GarageSmart™ Device
The GarageSmart
™
GS100-CR device can Open, Close or Stop your garage door from
anywhere using any smartphone, pc/laptop, tablet or any other device that has a connection to
the internet.
The GarageSmart™ App
GarageSmart
™
provides a user-friendly app that allows users to Open, Close, Stop or Monitor
multiple GarageSmart
™
devices from any Android or Apple smartphone or tablet.
App Installation
1. Visit Google Play or the App Store and search for GarageSmart, or scan the
associated QR code below.
2. Download and install the GarageSmart
™
app onto your smartphone or tablet.
Note: A Windows version is also available on request.
Adding Users, Remote Keys, and Scheduling
Before a User can start to control and monitor a GarageSmart
™
device, the User, a
Remote Key, and Schedule for that User must be added to your account, all of which
can be achieved by using the Online Control Panel.
An Installer Mode feature is also available within the Online Control Panel Manual that
allows a professional installer to fully test the installation and use of the GarageSmart
™
App to control the doors, by having the Access Code, User and Remote Key sent to
their email address.
If needed, see the Quick Start section within the Online Control Panel Manual. This
can be found by logging into the Online Control Panel, then clicking on Help. There you
will find step-by-step instructions as well as a tutorial video on how to add Users,
Remote Keys, and custom Schedules to your account.
If an Online Control Panel account has not been setup previously, then see the section
Creating a GarageSmart™ Account (Online Control Panel) above, to create an
account before performing the App Setup section below.
To Next Page
Loading...
Need help?
General