m DANGER
Never refuel the machine close to an open ame.
SPECIAL SAFETY REGULATIONS FOR THE USE OF INTERNAL COMBUSTION
MOTORS
m DANGER
Internal combustion motors are a particular danger during operation and refuelling.
Always read and follow the warnings. Non-compliance can lead to severe and even
lethal injuries.
1. Do not make any modications to the machine.
2. m CAUTION!
Risk of poisoning! Exhaust fumes, fuel, Lubricating oil vapor, sawdust and
lubricants are poisonous. Exhaust fumes must not be inhaled.
3. m CAUTION!
Risk of burns! Do not touch the exhaust system and the drive motor.
4. Do not use the machine in unventilated rooms or easily ammable environments.
5. m Risk of explosion!
Never use the machine in rooms with easily ammable substances.
6. During transport, secure the tool against sliding and tilting.
7. Ensure that no fuel is spilled on the motor or the exhaust during refuelling.
8. Repairs and setting work must be carried out by authorised specialists.
9. Do not touch mechanically moving or hot parts. Do not remove protective covers.
10. The values specied in Technical Data under sound power level (L
wA
) and sound
pressure level (L
pA
) are emission levels and do not necessarily represent safe
working levels. As there is a connection between emission and immission
levels, it cannot be used reliably to determine potentially required, additional
safety measures. Factors inuencing the current employee‘s immission level
include characteristics of the working environment, other noise sources etc. such
as the number of machines and other nearby processes and the time frame the
user is exposed to the noise.
The reliable immission level can also vary by country. However, this information
will give the machine‘s user the opportunity to carry out a better risk assessment.
11. Never put objects into the venting slots. This also applies when the machine is
turned off. Non-compliance can cause injuries or damage to the machine.
12. Keep the tool free from oil, dirt and other contaminants.
AFTER SALES SUPPORT
23
00800 4003 4003
aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Safety regulations
To Next Page