m CAUTION
Do not use a fuel mixture which has been stored for longer than 90 days.
m CAUTION
Never use 2-stroke oil with a recommended mixing ratio of 100:1. The manufacturer’s
warranty will be voided in case of engine damage due to inadequate lubrication.
m CAUTION
Only use containers designed and approved for the purpose to transport and store fuel.
Pour the correct quantities of petrol and 2-stroke oil into the mixing bottle provided
(see scale printed on the bottle). Then shake the bottle well.
Recommended fuels
Some conventional petrols are being blended with oxygenates such as alcohol or an
ether compound to meet clean air standards. Your engine is designed to operate
satisfactorily on any petrol intended for automotive use including oxygenated petrols.
It is recommended to use unleaded petrol as fuel.
Lubrication of chain and chain bar
Whenever you rell the fuel tank with petrol you must also top up the level of chain oil in
the chain oil tank. It is recommended to use standard chain oil.
6. FUEL MIXING TABLE
Mixing Procedure: 40 parts petrol to 1 part 2-stroke oil.
Petrol 2-stroke oil
1 litre 25 ml
5 litres 125 ml
m CAUTION
Never start or operate the saw unless the bar, chain and chain brake lever / front hand
guard are properly installed.
1. Fill the fuel tank with correct fuel mixture (Fig. 21/pos. K).
2. Fill the oil tank with chain oil (Fig. 21/pos. L).
3. Be certain the chain brake is disengaged before starting the unit (Fig. 11/pos 5).
Once you have lled the chain and oil tank, tighten the tank cover securely by hand.
AFTER SALES SUPPORT
37
00800 4003 4003
aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Set up/Operation
To Next Page
Loading...
