• Hazards from failure of the control system related to handle strength, position of
controls and marking.
• Hazards from break up (chain) during operation related to saw chain.
• Hazards from ejection of objects or uids related to chip discharge and fuel
spillage.
• Hazards from dropping the chain-saw while working in a tree.
RISK OF INJURY !
Contact with the saw-chain can lead to fatal cutting injuries.
Never put your hands into the running saw-chain.
RISK OF KICKBACK!
Kickback can lead to fatal cutting injuries.
RISK OF BURNING!
The chain and the guide bar heat up during operation.
Behaviour during an emergency
Start First Aid measures relevant to the injury and request medical help as quickly
as possible. Prevent the injured person from further injury and keep him/her rested.
For potentially occurring accidents, the First Aid kit, according to DIN 13164, should
always be handy at the work place. Material taken from the First Aid kit must be
replaced immediately. When you are requesting help, give the following information:
1. Location of accident
2. Type of accident
3. Number of injured people
4. Type of injuries
Store all safety notices and instructions for the future.
VI. SET UP
Before starting the equipment
This chainsaw is supplied ready-assembled.
Check that all moving parts move smoothly before you start using the equipment.
Check that all screws are securely fastened and also check all the safety devices.
Before adding fuel and starting the chainsaw, you must check the tension of the
chain in case some of the xings have come loose in transit.
34
AFTER SALES SUPPORT
aldi.service.uk@scheppach.com
00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Safety regulations/Set up Petrol chainsaw 41cc
To Next Page
Loading...
